MECHANICAL
Standard Crystal Vision module 266mm x 100mm
Weight: 140g
Power consumption: 3.2 Watts

VIDEO INPUT
One 3Gb/s or HD or SD input
270Mb/s or 1.5Gb/s or 3Gb/s serial compliant to EBU 3267-E, SMPTE 259M, SMPTE 292M and SMPTE 424M
3Gb/s cable equalisation up to 80m with Belden 1694A or equivalent
HD cable equalisation up to 140m with Belden 1694A or equivalent (approx. 100m with Belden 8281)
SD cable equalisation >200m Belden 8281 or equivalent
Input return loss: -15dB for 50MHz to 1.5GHz, -10dB for 1.5GHz to 3GHz
Auto detection of input – recognises whether the standard is 3G/HD or SD and switches the output slew rate automatically

VIDEO OUTPUTS
Five reclocked 3Gb/s, HD or SD outputs using RM41 frame rear module
270Mb/s or 1.5Gb/s or 3Gb/s serial compliant to EBU 3267-E, SMPTE 259M, SMPTE 292M and SMPTE 424M. Output follows the input format

DELAY THROUGH BOARD
50ns max

LED INDICATION OF:
Input present
Power supplies okay

GPI OUTPUT LEVELS
Electrically: Open collector transistors 30V, 270 ohm current limit resistors. Pulled up to +5V through 6800 ohm

GPI OUTPUTS
Two GPI outputs
Input present
Power supplies okay

LOCAL CONTROL
DIP switch on the board edge can be set to either auto detect input (up position) or to force output drivers' slew rate (down position)