Digital audio delay line DADA208D Dual digital audio distribution amplifier with selectable delay of up to one second at 48kHz. Independent delay adjust on each channel. Gives a maximum of two inputs and four non-reclocked outputs per channel. Can be configured so all outputs come from single input.    Tracking audio delay TAD202 Dual tracking audio delay unit incorporating both tracking and system delay to synchronise video and audio sources. Piggyback modules allow inputs and outputs to be either analogue, digital or a mixture of both.    3G/HD/SD audio/video delay AVDELAY 3G Audio/video delay designed for correcting large lip-sync errors on incoming 3Gb/s, HD or SD signals containing up to four groups of embedded audio, with the ability to change the relative audio/video timing by several seconds in either direction. Includes optional integrated fibre connectivity.    Decoder with tracking audio delay EMDEC-200 12 bit embedding decoder which combines a PAL/NTSC or Y/C to SDI broadcast decoder with synchroniser, tracking audio delay and embedder on one board.    Synchronisers with tracking audio delay SYN-A 3G 3G/HD/SD frame synchroniser which works with up to four groups of embedded audio. Allows a mixture of Dolby E and standard AES within a single audio group, with automatic Dolby E alignment. Features tracking audio delay, audio routing and audio resampling. Can insert SMPTE 2016 AFD data to help downstream equipment select correct aspect ratio. Includes optional integrated fibre connectivity. SYNNER-E 3G 3G/HD/SD combined video synchroniser, tracking audio delay, embedder/de-embedder, audio processor and video proc-amp with flexible processing of Dolby E and delay compensation. Working with up to four groups of audio, can embed or de-embed up to eight AES or Dolby E at the same time and in any combination. Allows a mixture of Dolby E and standard AES within a single audio group. Includes optional integrated fibre connectivity. SYNNER 310 3G/HD/SD combined video synchroniser, tracking audio delay and embedder/de-embedder. Allows the embedding or de-embedding of up to eight AES and eight analogue audio channels at the same time, depending on the piggybacks fitted. Includes audio routing, audio delay, video delay, stereo to mono conversion, video proc-amp and gain control. Will embed and de-embed Dolby E, allows a mixture of Dolby E and linear AES within the same group, and includes the option of fitting a Dolby decoder with stereo down mix. Includes optional integrated fibre connectivity.