 The DADA208 is a dual digital audio distribution amplifier with reclocked outputs, ideal for use in all broadcast areas where AES signals need to be distributed.
It has two stereo feeds in and up to four outputs of each channel, or can alternatively be configured to have one input and up to eight outputs.
It should be used for high protection requirements and can correct unstable AES inputs. An active cable equaliser makes it the first choice for long cable lengths.
The DADA208 has both GPI and board edge indication of input present.
Offering up to 24 channels in 2U, the space-saving 100mm x 266mm module is controlled manually from board edge.
The DADA208 can be used with eight different frame rear modules to obtain just the output configuration you need.
For 75 ohm audio...
The RM01 gives two outputs of each channel
The RM02 gives three outputs of the first channel and four of the second
The RM16 gives four outputs of each channel with an AES loop-through of the first.
For 110 ohm audio...
The RM03 gives four outputs of each channel
The 'easywire' RM35 gives four outputs of each channel, with its audio connections on a 64-way DIN 41612 connector which stretches the full width of the rear module and therefore gives more room to solder the wires on to the individual pins.
For impedance conversion...
The RM12 gives two 75 ohm inputs and four 110 ohm outputs of each channel
The RM13 gives two 110 ohm inputs and three 75 ohm outputs of each channel
The RM21 gives two 110 ohm inputs and two 75 ohm outputs of each channel.
Crystal Vision offers the choice of three digital audio distribution amplifiers, with an impressive number of different options including reclocked and non-reclocked outputs, BNC and D-Type connections, impedance conversion and the ability to incorporate delays. |
