MECHANICAL
Standard Crystal Vision module 100mm x 266mm
Weight: 170g
Power consumption: 5 Watts

VIDEO INPUT
One SDI input
SDI 270Mbit to EBU3267-E and SMPTE 259M
Cable equalisation >300m Belden 8281 or equivalent
Auto or manual 625/525 line selection

VIDEO OUTPUTS
Maximum of four composite outputs or two Y/C outputs with RM02 and RM18 frame rear modules (two composite outputs or one Y/C output with RM01)
Outputs are selectable between composite and Y/C using movable links
Maximum of four SDI reclocked loop-throughs with RM02 and RM18 rear modules (three with RM01)

ANALOGUE PERFORMANCE
Frequency response: +/-0.3dB 0 to 5MHz
Noise: <-54dB weighted luminance or chrominance
Blanking: To PAL/NTSC specification horizontally and vertically with selectable VBI blanking. PAL lines 7 to 22 and 320 to 335 and NTSC lines 10 to 20 and 273 to 282
Gain adjustment (Y, C or composite): +/-10%

DELAY THROUGH BOARD
1.5us

TEST PATTERNS
Four test patterns on analogue output can be selected from board edge or GPI: PLUGE, Vertical edge markers, Luma/chroma ramp and EBU colour bards. Requires valid SDI input signal from which to extract clocking information

GPI INPUT LEVELS
Active pull to ground, pulled up to 5V through 10 kohm

GPI INPUTS
Six GPI inputs
625 or 525 line standard (if manual select)
VBI blanked or unblanked
Setup on/off (NTSC only)
Test pattern select

LED INDICATION OF:
Power supplies on board
SDI input present
SDI input lock error
625/525 line input standard

BOARD EDGE CONTROL OF:
625 or 525 standard
VBI blanked or unblanked
Test patterns or serial input
Setup on/off and chroma bandwidth select (NTSC only)