MECHANICAL
Crystal Vision module 266mm x 100mm
Weight: 200g
Power consumption: 3.5 Watts

VIDEO INPUTS
Two optical inputs
Meets the SMPTE 297-2006 specification. This allows operation with single-mode and multi-mode fibre
Optical wavelength: 1260-1620nm
Input level maximum: -1dBm
Input level minimum: Typical -20dBm (-18dBm 3Gb/s pathological)
Connector type: SC/PC

VIDEO OUTPUTS
Two reclocked 3Gb/s, HD or SD outputs per channel using RM55 frame rear module
Will drive 270Mb/s or 1.5Gb/s or 3Gb/s serial compliant to EBU 3267-E, SMPTE 259M, SMPTE 292M and SMPTE 424M
Passes all 3Gb/s, HD and SD signals transparently, including pathological signals
Recognises whether the standard is 3G/HD or SD and switches the slew rate automatically

POSITION IN FRAME
The FRX 3G can be housed in any frame slot position but due to its extra height it is not possible to place Standard Definition or audio cards directly above it when the FRX 3G is in even numbered slot positions. 3Gb/s and HD cards do not share this restriction

DELAY THROUGH BOARD
Link delay less than 100ns

LED INDICATION OF:
Power supplies okay
Optical input present

GPI OUTPUT LEVELS
Electrically: Open collector transistors 30V, 270 ohm current limit resistors. Pulled up to +5V through 6800 ohm

GPI OUTPUTS
Two GPI outputs
Input present for each channel

LOCAL CONTROL
Selectable HD/SD slew rate

REMOTE CONTROL
RS422/485
19200 baud, 8 bits, 1 stop no parity
Monitoring from frame active front panel and remote panel
Statesman allows monitoring from any PC on a network. Two Statesman menu tabs available: status panel (shows input presence, slew rate setting and power supplies condition) and received power panel
SNMP monitoring and control available as a frame option