MECHANICAL DIMENSIONS Desk top box Height 44.5mm, width 223mm, depth 365mm Empty weight 1.9kg Maximum loaded weight 2.4kg POWER REQUIREMENT OF FRAME 90-264VAC, 47-63Hz POWER SUPPLIES Indigo DT has one built-in 60W power supply REAR MODULES Crystal Vision offers a wide choice of frame rear modules which slot on to the back of the frames Available with BNC, D-Type, 'easywire' DIN 41612, RJ45 and optical connectors Indigo DT can be used with the single slot and double slot rear modules Rear modules are individually retained by two screws OPERATING CONDITIONS 0 to 40 degrees C non-condensing Ventilation side to side, without air filters FRAMES MONITORING Indigo DT monitors and reports frame fan status and temperature If any parameter should fall outside its range, the frame status will indicate a fail condition on both the front panel indicators and by the change over relay contacts accessible from the rear interface connectors REMOTE CONTROL Six control lines per module. Assigned on module (eg. GPI, RS422/RS232) Contact open/closure for any power supply or frame fault condition (supply out of range or failure, fan too slow or fail, over-heat) RS485 loop system to all modules and rear connection (rear connection by way of 26-pin high density D-Type connector and RJ45 connector) Up to two Indigo DT desk top boxes can be controlled by a REMIND active panel via RS485