Multi-channel content monitoring

The MON210 is a dual channel SDI to composite monitoring encoder. It provides non-broadcast conversion of SDI sources to PAL/NTSC or Y/C.

It provides two inputs and a maximum of five composite outputs for each channel, or two Y/C pairs and one composite.

Four of the outputs are link selectable between composite and Y/C, while one is a fixed composite output.

Use it for multiple monitoring applications

The MON210 is ideal for driving picture monitors, waveform monitors and vector scopes. It is particularly suited to any multi-channel content monitoring applications requiring multiple analogue outputs where space and cost are at a premium (and signal distribution is not required).

Many useful features

It has an 8 bit input with a 9 bit digital to analogue converter to maintain the composite signal resolution, and includes the flexibility of selectable blanking. It has continuously variable gain of +/-10% and a basic modulated ramp analogue test pattern which is useful for correct installation.

Flexible outputs

Flexible outputs are available with the rear module selected depending on the number of outputs required.

The RM01 frame rear module gives two composite outputs or one Y/C output per channel.

The RM02 gives access to four composite outputs or two Y/C outputs of the first channel, and three composite outputs or one Y/C output with an additional Y of the second channel.

The RM18 gives access to five composite outputs or two Y/C outputs per channel.

Save rack space

The MON210 is a space-saving 100mm x 266mm module which is housed alongside any other product in the standard frames - available in 4U, 2U, 1U and desk top box sizes - and with up to 12 boards - or 24 channels - fitting in 2U.

Choose your control

The MON210 can be either controlled manually using board edge switches or by using GPI inputs and outputs.