MECHANICAL
Two slot high 266mm x 100mm module
Weight: 268g
Power consumption: 10.5 Watts

VIDEO INPUTS
Eight SDI inputs
SDI 270Mbit to EBU 3267-E and SMPTE 259M
Cable equalisation >200m Belden 8281 or equivalent
Auto 625/525 line selection

SDI REFERENCE
SDI 270Mbit to EBU 3267-E and SMPTE 259M
Cable equalisation >200m Belden 8281 or equivalent
Auto 625/525 line selection
SDI reference loop-through

ANALOGUE REFERENCE
Composite Black & Burst or mixed syncs
Sync amplitude 100mV to 4V
Link selects 75 ohm termination or high-impedance with loop-through
Auto 625/525 line selection

VIDEO OUTPUTS
16 (8 x 2) SDI outputs with RM19 frame rear module
SDI 270Mbit to EBU 3267-E and SMPTE 259M
Vertical interval switching to SMPTE RP168
Will drive >200m Belden 8281 or equivalent
All outputs DVB-ASI compatible

DELAY THROUGH BOARD
20ns

LED INDICATION OF:
Power supplies on board
SDI reference present
Analogue reference present
625/525 reference input standard
Multipurpose LEDs show either SDI inputs present, routing selected or routing about to be selected

LOCAL CONTROL
Routing selection
Factory calibration
Remote/local control
SDI analogue reference
Frame-rate/field-rate/instantaneous switching

REMOTE CONTROL
RS422/485
19200 baud, 8 bits, 1 stop no parity
Two serial ports - one connected to frame front panel, one can be linked to rear of frame instead of GPI signals
Front panel control from frame active panel and remote panel
SW808 Controller is a dedicated 1U control panel allowing tactile control in familiar style
Statesman allows control from any PC on a network
SNMP monitoring and control available as a frame option

GPI CONTROL
Contact-closure inputs, +5V to +35V (10k on-board pull-up to +5V)
Current-sink outputs. Can drive LED (as supplied) or 24V bulb (depending on board resistor selection)