MECHANICAL
Standard Crystal Vision module 266mm x 100mm
Weight: 200g
Power consumption: 6 Watts

VIDEO INPUT
SDI 270Mbit to EBU 3267-E and SMPTE 259M
Cable equalisation >200m Belden 8281 or equivalent
Auto 525/625 line selection
May contain embedded audio when input and output frequencies are locked

VIDEO OUTPUTS
Maximum of four outputs (two outputs with frame rear module RM23, three with RM02 and four with RM18)
SDI 270Mbit to EBU 3267-E and SMPTE 259M with EDH

ANALOGUE REFERENCE
Analogue Black and Burst, mixed syncs or video
Amplitude of syncs 150mV to 4V
Link on PCB selects 75Ohm termination or high impedance
Reference rear module loop-through available on RM23 - loop does not need SYN102 to be fitted as rear module has passive circuitry required
Reference active loop-through available on RM02 and RM18 - loop needs SYN102 to be fitted

DELAY THROUGH BOARD
2us min - 2 fields max

FREEZE FUNCTIONS
Manual freeze allows the SYN102 to be used as a simple still store. Selecting single field output can counteract any flicker caused by the interlacing of the two fields on a picture with significant movement. Either field can be selected. The single field is output only when the picture is frozen. Automatic freeze is available when input fails through loss of signal. The user can specify to show the last good field repeated before picture failure, the whole frame in which failure happened (useful for diagnostic purposes) or a black screen

AUDIO FOLLOW OUTPUT
TTL output on BNC
Pulse length shows delay through store
Can provide control signal for audio delay systems

GPI INPUT LEVELS
Active: connect to ground
Inactive: high impedance, or 3 to 48 volts
Input current <50uA

GPI OUTPUT LEVELS
CMOS levels
Max current 2mA

GPI INPUTS
Freeze

GPI OUTPUTS
Large delay in synchroniser (>25 lines)

LED INDICATION OF:
Power supplies on board
SDI input present
Analogue reference present (vertical syncs detected)
Input EDH errors
Large delay in synchroniser (>25 lines)
Manual freeze

LOCAL CONTROL
Variables and options set by shaft encoder with values and prompts on 10 character alphanumeric display on board edge
Output timing adjustment of 0 to 2 fields, set as vertical and horizontal offset

REMOTE CONTROL
RS422/485
19200 baud, 8 bits, 1 stop no parity
Control from frame active panel and remote panel
Statesman allows control from any PC on a network
SNMP monitoring and control available as a frame option