The VDA110M HD is a video distribution amplifier for any analogue sources.

It is ideal for the distribution of SD Black & Burst or HD Tri-level syncs analogue reference, or for distributing SD or HD analogue video.

Providing multiple outputs of an analogue source, it features one input and up to eleven outputs or ten outputs with a loop-through.

It can be used with five different frame rear modules to give the perfect output combination for every application.

The VDA110M HD gives the choice of differential and non-differential inputs.

Passive loop-throughs are available by choosing the correct rear module and are independent of the VDA110M HD – meaning it is possible to remove the board without losing the looped-through source.

High quality equalisation will correct any distortion to the analogue signal caused by up to 300m of cable length, making the board suitable for applications involving long cable runs.

It also features gain adjustments of +/-3dB.

Installing the VDA110M HD is made easy with the inclusion of an SD or HD present indication, while a video monitoring test point BNC at the board edge means a waveform monitor can be plugged straight into the board, facilitating signal monitoring during the setting up of the cable equalisation.

Gain and equalisation on this space-saving 100mm x 266mm module can be controlled manually from board edge or by using GPIs.

Flexible outputs are available. The RM01 frame rear module gives five analogue outputs and the RM02 eight outputs. The RM10 gives seven outputs with a loop, the RM16 ten outputs with a loop and the RM18 eleven outputs.

The VDA110M HD is one of three analogue video distribution amplifiers from Crystal Vision which allow the customer to get just the configuration and features they need.