MECHANICAL
Standard Crystal Vision module 266mm x 100mm
Weight: 180g
Power consumption: 7 Watts

VIDEO INPUT
One HD or SD input
270Mb/s or 1.5Gb/s serial compliant to EBU 3267-E, SMPTE 259M and SMPTE 292M
The main video formats supported are 625, 525, 720p50, 720p59.94, 1080i50 and 1080i59.94
HD cable equalisation up to 140m with Belden 1694A or equivalent (approx. 100m with Belden 8281). SD cable equalisation >250m Belden 8281 or equivalent
Input return loss: -15dB for 5MHz to 1.5GHz
Auto 50/59.94Hz and video format selection

VIDEO OUTPUTS
Four reclocked and delayed HD or SD outputs using RM34 frame rear module
270Mb/s or 1.5Gb/s serial compliant to EBU 3267-E, SMPTE 259M and SMPTE 292M
Output follows the input format

STANDARD DEFINITION DELAY
Minimum SD delay: 2.3us (approx. 30 pixels)
Maximum SD delay: 3.12 seconds/78 frames (625 line) and 3.103 seconds/93 frames (525 line)
Adjustable in steps of frames, lines and pixels (74ns)

HIGH DEFINITION DELAY
Minimum HD delay: 673ns (approx. 50 pixels)
Maximum HD delay: 560ms (number of frames is dependent on HD format)
Adjustable in steps of frames, lines and pixels (13.4ns)

FEATURES
Passes entire video stream, including embedded audio and HANC and VANC
16 user defined presets allow the storing of board configurations for future use

GPI INPUTS
Four GPI inputs can provide 16 different recalls of delay time setting
Active: pull to ground, pulled up to +5V through 6800 ohm

GPI INPUTS
Two GPI outputs
SDI input present and audio follow output

GPI OUTPUTS
Two GPI outputs
SDI input present and audio follow output
Electrically: Open collector transistors 30V, 270 ohm current limit resistors. Pulled up to +5V through 6800 ohm

LED INDICATION OF:
Power supplies on board
HD input present
SD input present
Time delay being adjusted

LOCAL CONTROL
Board edge with ten character alphanumeric display

REMOTE CONTROL
RS422/485
19200 baud, 8 bits, 1 stop no parity
Control from frame active front panel and remote panel
Statesman allows control from any PC on a network
SNMP monitoring and control available as a frame option