- Request quote
- Request product demo
- Request distributor
- Request technical help
- Request latest control software
What is it?
HD/SD three-layer logo keyer with 4 GB of internal storage for up to 250 graphics and full audio processing.
Reason to choose it...
It's a feature-packed, space-saving and easy-to-use modular solution to station branding. Feature-packed…put three graphics on a screen at once, use the look-ahead preview to perfect what's coming next, and get the effect you want by tweaking the key processing controls and mixing the audio. Space-saving…fit up to 12 logo keyers in 2U. Easy-to-use…the software is so instinctive you'll have graphics on screen within just a few minutes.
Branding HD or SD television stations with three graphics at the same time, or adding line idents. See who's using it.
Try out the MultiLogo VisionWeb demo (opens in new window) – you'll see how easy it is to operate MultiLogo V132 from your web browser, while exploring the functionality of the product. (The primary way to set up and control MultiLogo is via the MultiLogo Control Software.)
Got a question?
We would be very happy to answer any questions you've got about the MultiLogo V132. Either send us an e-mail or get an immediate response by speaking to us now on our Live Chat...
- Main features
- What outputs do I get?
- What do I order?
- Who's using it?
- Video demo
- HD/SD modular logo keyer, with one external video input for main programme
- Show up to three graphics at once: six internal players provide a key and fill for three layers of keying
- Store all the graphics you need: store up to 250 still or animated logos in 4 GB internal store with DRAM memory, backed up to Flash
- Fine-tune until you're happy: keyers have separate gain, offset, opacity, inversion and fade controls
- No problem if your graphic or clip isn't perfect: use the key masks and easily trim any recorded video clips
- Easy to insert text: type in and format text for internal use or for simple graphics
- Know (and perfect) what's coming next: with full look-ahead preview
- Play out audio: embed up to four audio groups into the video outputs
- Sophisticated audio mixing: generate the output audio from a mix of the audio embedded on the video input and audio clips sourced from the internal audio stores, with fading, dipping and level adjustments
- Save time: select just the variables you want to save and recall using 256 presets
- Inputs and outputs accessed by using an appropriate rear module (either RM52 or RM52 + RM33 if ML-GPI8 add-on board fitted)
- Know you'll stay on air: relay bypass protection of input to Program output
- Housed in Indigo rack frames
- Save rack space: 100mm x 266mm module allows 12 MultiLogo V132 in 2U (six in 1U and two in desk top box)
- Easy-to-use: comes with instinctive MultiLogo Control Software for operation of all functions - with control also available from board edge, GPIs, frame integrated control panel, VisionPanel remote control panel, SNMP, ASCII and JSON protocols, Statesman Lite PC software or the web browser-based VisionWeb Control
- ML-GPI8 add-on board provides additional eight GPI inputs and eight GPI outputs, ideal for broadcasters who work by recalling presets
- Five year warranty (with product registration)
- This product is available to either purchase or hire, with hire pricing typically 6% of list price per week (with one week minimum hire period and £200 minimum charge)
The best solution to station branding
MultiLogo V132 is an exceptional multi-layer graphics store and keying device.
It provides three layers of keying from a variety of internal and external sources including a multi-port non-volatile 4 GB video and audio store for up to 250 graphics. It features one external video input.
MultiLogo V132 is shipped with a CD containing Crystal Vision’s instinctive-to-use drag-and-drop MultiLogo Control Software which runs on the graphics computer and allows easy board control and files conversion.
Perfect for setting up applications in advance, the MultiLogo Control Software is a single piece of software which does everything for you and gets your logos on the screen within just a few minutes. The software stores a list of IP addresses at which any MultiLogos can be found, with the user able to easily change the control from one logo keyer to another by selecting from the list.
MultiLogo V132 works with both still and animated graphics and supports the BMP, JPG, TGA, PNG, SGI and WAV file formats. Other file formats can easily be converted to MultiLogo’s native file format using the Image Converter program which is part of the MultiLogo Control Software and which can be used to extract either the video, key, or both video and key from image sequences.
MultiLogo’s uCLinux operating system results in sophisticated file handling and stability. There is also excellent connectivity with a PC, with the graphics and audio clips transferred over 100Mbit Ethernet from the PC directly into the internal store on the board which allows extensive information to be transported easily.
What can you use it for?
MultiLogo V132 is a very flexible device. Here are just some of the ways you could use it...
- Adding up to three layers of graphics on to a single video input - the main application for MultiLogo V132.
- A flexible playout device for clips.
- Adding additional audio to a video source - whether from an operator with a microphone, an external storage device or stored internally.
- Line identification with video and audio notification.
So many sources to choose from!
MultiLogo V132 offers the choice of different sources for your logos – both internal and external.
The internal video store is available with 4 GB of memory for up to 250 graphics. Logos and audio clips are copied from the graphics PC to both the DRAM and Flash memories on MultiLogo V132 over 100Mbit Ethernet, providing the dual benefits of DRAM’s fast reading and writing and the Flash’s non-volatile storage which retains the data even when the power is off. The graphics are stored in Flash and transferred to DRAM on power up.
External sources are also available: MultiLogo V132 has one HD or SD video input for the main programme.
MultiLogo V132 can record a signal from the external video input using the Recorders tab – convenient for those logos that are supplied to you on tape or that you need to take from a live video feed.
You can record the fill only or key only, set the number of frames to be recorded and trim the recorded video. Mask controls allow the recorded picture size to contain just the part of the image of interest – and optimise the file size. Any recordings are initially stored in the DRAM memory and need to be copied to the Flash for permanent storage.
Transferring graphics from a PC to the video and audio stores
It’s very easy to transfer graphics and audio clips from a PC to MultiLogo's internal video store using the Store tab on the MultiLogo Control Software, with its familiar-looking directory tree. The upper panes show the PC file structure. Just browse to the folder that contains the images you wish to upload and then drag and drop them into the MultiLogo file store in the lower pane. Each screen in the MultiLogo Control Software indicates how much space you have remaining in the store - another useful feature.
MultiLogo V132 can multi-task, allowing you to transfer graphics from the PC or record the video input at the same time as displaying the three graphics on screen - perfect if you need to update your stored graphics while you are on air.
Colour coding makes it easy for you to see at a glance what sort of files you’ve got in your internal store.
Green file icons have been converted to MultiLogo’s native format, green with yellow flash files were already in the required MultiLogo format, while a white file needs converting. Audio files are blue. A yellow file warns you that the graphic is in a different format to the output video format and cannot be used.
For playing out files held in the internal store, MultiLogo has a total of six video ports for the six RAM video streams along with two audio ports. These six video ports could be assigned three logos with accompanying key signal or alternatively six self-keyed logos – with three of these then selectable for display using the three internal keyers. Simply select a port then double click a file to assign it to that port – the file name will appear beside the port button.
Set up your three layers of keying - with full look-ahead preview
The Mixer tab is used to assign the fill and key for each of your three layers of keying and to select which keyers are active on the Program and Preview outputs.
In addition to the graphics assigned to the six RAM ports (with the graphics named for easy reference), it is possible to select black, one of the four video inputs or the colour matte generator as a source for each fill and key. Selecting black could allow you to use a black background and the three key layers to combine several key images into a single image, either for storage or for use with multiple single keyers downstream. And if you're setting up the graphics at a sports event you could use the matte generator as a video source before the cameras are wired in, allowing you to set up your graphics in good time without waiting for the real sources to be connected.
The transition controls section on the Mixers tab allows for a manual or timed mix transition between the Program and Ppreview outputs. Full look-ahead preview means you will never have to take a leap in the dark with your more complex transitions. After the logos and keys are set up on the Preview output, the transition can be previewed in full on this output – allowing you to make any necessary changes before committing it to the main output. The proper transition can then be applied by using the Cut button for an immediate effect or the Auto button for a fading effect lasting up to 1024 frames. The transition can alternatively be triggered by pulling down the relevant GPI. By the end of the transition the contents of the Preview and Program outputs will have swapped over and it’s time to start setting up your next set of logos on the Preview output.
The Mixer tab also includes a manual or automatic Fade to black control, should you need to fade down the complete programme.
Perfect your three layers of keying
MultiLogo V132 benefits from Crystal Vision's years of keying expertise and the Keyers tab contains all the controls you need to set up MultiLogo's three keyers to perfection.
MultiLogo can be used either with graphics that have a separate key signal or with self keyed graphics, with the key mode selectable as Self Key, Split Key or Full Key. For logos already on a black background Self Key is the simplest method, using the luminosity in the fill signal to generate the key information – while presenting no issues with keeping graphics in sync during animation. The highly-favoured Split Key uses both the fill and key signal to generate the key. Finally, Full Key forces the graphic to be full frame. Both additive and multiplicative keying is available, allowing you to choose a method to suit the graphics you're working with.
The key processing controls on each of the three keyers allow you to achieve just the effect you need.
Key offset and gain can be used to correct key signals or for self keying. Logos can be inveted, while a semi-transparent effect can be achieved with the opacity control. The regularly-used key transition control allows you to fade the key on and off.
A user-definable rectangular mask is available and forces the background video through the key layer. It can be used to hide unwanted areas of a graphic. Alternatively you could use it to pick the logo you need from a stored image featuring several logos. It also allows you to Full Key and force the entire area inside the mask to key.
Positioning your graphics
The position of the graphics on screen can be controlled - ideal if you have a less than full screen graphic, as you can place it exactly where you need it to be within the active picture area by moving it horizontally and vertically.
Playing out animations and video clips
The Animation section of the Players tab controls how a stored multi-frame video such as an animated graphic or captured video is played. Normal tells the file to play to the end and then freeze on the final frame. Loop tells the file to play again from the start and is most useful for animated graphics that stay on the screen for an extended period. If you’re short of time to make your graphic loop cleanly, then you can have the last frame identical to the first with the Bounce control, which plays the clip forwards then backwards repeatedly.
The ability to trim any recorded video clips makes it easy to transfer a clip and key supplied on tape – perfect for those OB and studio applications where this is often the case. Simply step through the clip frame by frame using the Next and Previous controls in the Stills section and set your Mark in and Mark out points. The graphic will then run from these points, and you can either trim the clip to get rid of the unwanted sections or alternatively cancel the selection and return to the original.
You can also lock together a pair of outputs (RAM 1 with RAM 2, RAM 3 with RAM 4 and RAM 5 with RAM 6) – perfect for when you’re doing animated ‘split’ keying as it ensures your fill and key signals play out at the same time and are at the same position on the screen.
Always get a correctly-timed output
MultiLogo V132 can be left to free-run or can be locked to either the video input or to an external Black and Burst or tri-level syncs reference using the Genlock source buttons on the Engineering tab. This analogue reference combined with the one-line TBC means that MultiLogo always gives out a correctly-timed, uninterrupted output even after a hot cut from an upstream switch – therefore avoiding any transmission problems.
In auto mode the output format will follow the input format or the format of the external reference. Should this not be desired, MultiLogo can be forced to cross-lock by selecting the output video standard, which also allows the logo keyer to be powered without an input and used as a standalone video source or test pattern generator.
The output delay sliders can be used to add an offset delay of up to one video line between the input or external reference and the output – allowing you to time the MultiLogo output into the rest of your system and align your pictures perfectly.
Insert simple text - easily
Quick Text is MultiLogo's simple text insertion feature.
Perfect for applications such as creating a studio ident for internal use, it allows the operator to use the MultiLogo Control Software to type in text and then convert that text to a graphic format which is saved in the Flash store on the MultiLogo board. This graphic can then be displayed on screen by using one of the key layers.
Defaulting to centre alignment, Quick Text can be used with an unlimited number of characters and with any available Windows font. Multiple lines of text can be displayed – simply type \n to put text on a new line. The text box background can be any 24 bit colour and can be sized up to full screen 1080p.
The most powerful audio branding
Many broadcast engineers select MultiLogo because of its sophisticated audio capabilities, which make it the perfect device for powerful audio branding applications.
MultiLogo V132 can embed up to four audio groups into its video outputs, with an audio router allowing selection of exactly which sources are embedded. Audio mixing allows the output audio to be generated from a mix of the background audio plus up to two audio clips which can be inserted over the top, and will cross-fade when switching between audio streams to ensure a smooth transition with no audio clicks.
On MultiLogo V132 the background audio can be sourced from the audio embedded in the video input.
Audio clips such as a voiceover or sound effect can be sourced from 32kHz, 44.1kHz or 48kHz sampled PCM WAV files held in two audio stores on MultiLogo (perfect for pre-determined audio).
The audio clips can be faded in and out either manually or automatically and have their level adjusted, while the background audio can be partially or fully dipped allowing it to be mixed with or be replaced by the audio clips. The audio clips chosen for embedding will be common to both the Program and Preview outputs.
The audio clips can be played out separately, or alternatively the audio and video ports can be locked together so that the files can be played out at the same time, with the option to loop the audio or just play it once – perfect for giving a graphic or animation accompanying audio. If a player’s audio was recorded in Dolby E, then selecting ‘Dolby E Format’ will disable audio level control and fading for that player. Audio can be set to fade to silence during a fade to black.
There are also a number of sources of ancillary data. Ancillary data can be passed directly from the input to the outputs, or can be set to follow the video mixed to the Program and Preview outputs.
The power of presets
Up to 256 presets can be stored, with the presets holding the current state of the MultiLogo including which files have been assigned to the DRAM memory, the position of the keys and the key gain settings. You can choose whether a preset plays a clip or transition or simply cues it.
Partial presets allow complete versatility in how you construct your presets and help make MultiLogo a true on air device. Partial presets let you select the individual parameters that are to be saved and then recalled – meaning you don't need to store a preset for every combination of logos you might ever want. Using partial presets you can change one key layer without affecting a second keyer that may be on air.
Identifying text can be assigned to each numbered preset, such as giving the programme name or logo name and its purpose – making it quicker for the operator to select the correct preset.
The Preset Import/Export feature allows the operator to easily copy settings from one board to another and is perfect for those systems involving multiple logo keyers. You can choose to import/export either all presets or an individual one, while presets can also be deleted. The current control state of the board is always saved and exported with the presets. The presets are copied to a file on the PC, and this file can then be downloaded to another MultiLogo, giving the same controls and presets as the original.
The Preset Import/Export feature is ideal for those who have multiple MultiLogos that they want to set up the same way and allows boards to be interchanged. For example, you might want to simplify your system by putting every logo and associated presets in every MultiLogo so that any board can be used for any channel, but this means that every logo keyer would need to be set up for every possible usage with potentially hundreds of presets needing to be configured. Here the Preset Import/Export feature means only one board has to be set up and then the presets can be copied on to the rest. Or you might have every logo keyer different and containing only the files and presets it needs. If a board dies, the Preset Import/Export feature provides a quick way to put in a different board and make it look the same as the original in terms of operation.
You can also save time with the Save Power On control which allows you to save the state of the MultiLogo after power up and then recall it using the Recall Power On control.
More control options (including very flexible GPIs)
The MultiLogo Control Software offers the most complete control of MultiLogo. However it's not the only option available.
MultiLogo V132 includes extremely flexible GPI control of each key layer, where you can either control the key layers directly or bundle all the operations into a preset and recall that – which facilitates the inclusion of complicated effects from any mixer or automation system.
Four fully configurable GPI inputs can be toggled between recalling presets and transition control. When transition control is chosen, each GPI can be individually selected to control key layers 1, 2 and 3, start any of the video and audio players or do a mix between Program and Preview. This allows the three logos to be faded up and down independently and makes it easy to put together a sequence of changes using all three key layers – without the need for advanced planning. MultiLogo V132 copes with both pulse and latching GPIs.
For those that want to drive lights, MultiLogo V132 features one GPI output which acts as a tally to indicate whether key layer 1 is faded up.
More GPIs are available on the MultiLogo V132 by fitting an ML-GPI8 add-on board. The ML-GPI8 is designed for engineers to build simple push button control panels and ideal for broadcasters who work by recalling presets and who want a manual backup in case the automation system fails. The ML-GPI8 provides eight GPI inputs for recalling eight presets along with eight GPI outputs which act as a tally and show which of the eight GPI presets was recalled most recently via the GPI input.
Crystal Vision's own ASCII protocol can be easily implemented for simple button box type control, offering a short, simple message structure with no handshaking or error recovery. Supporting both Ethernet and RS422, it provides a method to get and set the value of controls, with MultiLogo's XML file describing all the extensive controls available. MultiLogo also supports VDCP and Sony VTR for those that wish to use these industry standard protocols for operating the logo keyer using an automation system.
Basic control is also available from Crystal Vision's usual methods – board edge switches, an integrated control panel on the AE frames, the VisionPanel remote control panel, SNMP, the Statesman Lite PC software and the VisionWeb Control web browser software. Try the MultiLogo VisionWeb demo...
Save rack space - and protect your output
MultiLogo V132 will save you rack space, with up to 12 logo keyers fitting in 2U. The 100mm x 266mm module fits in Crystal Vision’s Indigo frames – available in 2U, 1U and desk top box sizes – allowing it to be easily integrated with any of the company’s interface and keying products.
MultiLogo V132 can be used with two different frame rear modules to access the inputs and outputs: either the RM52 or the RM52 + RM33 if the ML-GPI8 add-on board is fitted. There are two RJ45 connectors on the RM52: one allows the MultiLogo Control Software to communicate with the board via Ethernet, with the other allowing RS422 control.
With the logo keyer one of the last pieces of equipment in the chain, the RM52 rear module provides relay bypass protection of the input to the Program output in the event of power failure or board removal, and is a simple way to keep it - and you - on air.
Standard Crystal Vision module 266mm x 100mm
Power consumption: 12.5 Watts
MultiLogo runs the uCLinux operating system
VIDEO AND AUDIO STORE
Non-volatile multi-port internal store for pre-prepared still or animated graphics and audio files
Internal store is duplicated in DRAM and Flash
4 GB store for up to 250 graphics
DRAM store has six video output streams and two audio output streams. Flash store is used to preserve all video and audio data when the board is powered down, with data then copied to RAM on power up
MultiLogo can read six and write two images at once
All three keying layers can be used while graphics are being transferred to the MultiLogo board
One HD or SD input (for main programme)
Sections of the live HD or SD input can be recorded. Number of frames to be recorded can be selected and whether to record fill only, key only or fill and key. Mask controls can be used to reduce the recorded picture size to the area of interest only. All six RAM video players remain fully operational during recording
270Mb/s or 1.5Gb/s serial compliant to SMPTE 259 and SMPTE 292-1
HD cable equalisation up to 140m with Belden 1694A or equivalent (approx. 100m with Belden 8281). SD cable equalisation >250m Belden 8281 or equivalent
Input return loss: -15dB for 50MHz to 1.5GHz
Auto 50/59.94Hz and video format selection
ANALOGUE REFERENCE AND DELAY THROUGH BOARD
The output can be locked to an SD Black & Burst or HD tri-level syncs analogue reference
Each input has a one-line TBC to align the input signal timing
SD delay: 6.5us min - one line plus 6.5us max
HD delay: 1.7us min - one line plus 1.7us max
Output timing can be from either an analogue reference or input 1, with a user offset of up to one video line. When locked to an analogue reference, the relative timing will be 0.0us plus any user set delay. Using input 1 as the reference source will give the minimum delay plus any user set delay
Input to output embedded audio processing delay: 4 lines
One HD or SD Program output and one HD or SD Preview output using RM52 frame rear module, or RM52 + RM33 rear modules together if ML-GPI8 add-on board is fitted
Relay bypass protection of the input to the main output
Serial output: 270Mb/s or 1.5Gb/s serial compliant to SMPTE 259 and SMPTE 292-1. In auto mode MultiLogo will default to outputting either the input standard or the external reference standard. When the output required is HD and the reference is SD Black and Burst, MultiLogo can be forced to cross-lock as long as the output format selected and external reference share the same frame rate. The output video standard can be fixed so that the MultiLogo can be powered without input and used as a standalone video source
Three keyers can independently bring up three graphics and associated keys from the internal or external sources
Graphics can either have separate key signal or be self-keyed (options are Self Key, Split Key and Full Key)
Key processing can be additive or multiplicative
The three keyers have separate gain, offset, opacity and inversion controls
Key fade control to fade graphics in and out
Fade to Black
Program, Preview and keys can be set as black or as a colour from the matte generator
User-definable rectangular mask available to hide unwanted areas of graphic (with left, right, top and bottom adjustable sliders)
PLAYING OUT GRAPHICS
The supported file types are BMP, JPG, TGA, PNG, SGI and WAV (32, 44.1 and 48kHz PCM audio). Other file formats can be converted to the required MultiLogo format using the included Image Converter program and then transferred from a PC to the board using the MultiLogo Control Software
The position of the graphics on the screen can be controlled
The animation controls set the way the selected multi-frame video files are played out and are Play, Pause, Stop, Normal, Loop and Bounce
Recorded video clips can be easily trimmed: go through clip frame by frame using Previous and Next controls and select Mark in and Mark out points. The clip will then run from the new Mark in and Mark out points and can be either trimmed to permanently remove the unwanted sections or cancelled to return to the original
For animated 'split keying', outputs can be locked together to ensure fill and key signals play out at the same time and are same screen position
Preview output can be used to preview the next state and the transition to that state before it is applied to the Program output. After the logos and keys are set up on the Preview output, the full transition can be previewed on this output. The proper transition can then be applied by using the Cut button (immediate) or Auto button (up to 1024 frames), or by pulling down the relevant GPI. By the end of the transition the contents of the Preview and Program outputs will have swapped over
Simple text insertion feature which is part of the MultiLogo Control Software
Allows operator to type in text for internal use or simple text graphic, and then convert the text to a graphic format which is saved in the Flash on the MultiLogo board. The text will need to use one of the key layers to be displayed
Can be used with an unlimited number of characters and any available Windows font
Text box background can be any 24 bit colour and can be sized up to full screen 1080p
Text defaults to centre alignment
Type \n to put text on a new line
MultiLogo can embed up to 16 channels (eight stereo pairs) of audio into four groups on its output video. Audio routing of the individual channels allows selection of which of the possible sources are embedded. Audio cannot be shuffled between the embedded input and output
The background audio can be sourced from up to four groups of audio embedded in the video input
Up to two audio clips such as a voiceover or sound effect can be sourced from 32kHz, 44.1kHz or 48kHz sampled PCM WAV files held in two audio stores on MultiLogo
Audio mixing allows the output audio to be generated from a mix of the background audio and voiceover/sound effect clips
The background audio can be partially or fully dipped between 0% and 100% allowing it to be either mixed with or be replaced by the voiceover/sound effect clips. Dipping automatically begins as soon as an audio player starts or when the external AES input passes a threshold level. If multiple voiceover/sound effect clips are enabled, the background signal will be dipped to the lowest level set. A value of zero means the background audio will be fully faded out during the voiceover
The voiceover/sound effect clips can be faded in and out independently, either manually or automatically. A fade in and fade out auto transition rate can be set between 1ms and 5000ms
The voiceover/sound effect clips can have their level adjusted between 0% and 100%
Audio can be played out separately, or audio and video ports can be locked together so files can be played out at the same time allowing a graphic or animation to have accompanying audio
Audio player controls are: Play, Stop, Pause, Normal (play once), Loop (play continuously), Lock to RAM (follow selected video store), Unlock, and Dolby E (select if audio recorded as Dolby E; this will then disable audio level control and fading). The audio player controls are inactive when an audio file is locked to a video port
Audio can be set to fade to silence during a Fade to black. The fade rate can be set between 1ms and 5000ms
Ancillary data can be taken from the input
Ancillary data can be passed directly from the input to the outputs
Up to 256 presets can be stored and recalled from the MultiLogo Control Software or GPI. MultiLogo V132 can recall up to 16 presets by GPI
Presets store the current state of the MultiLogo including which files have been assigned to the RAM memory, the position of the keys and the key gain settings
Partial presets allow the user to select the individual parameters that are to be saved and then recalled
Select whether a preset plays a clip or transition, or simply cues it
Identifying text can be assigned to each numbered preset
State of MultiLogo after power up can be saved using Save Power On control and recalled using Recall Power On control
The Preset Import/Export feature allows settings to be easily copied from one board to another. Using the MultiLogo Control Software, either all presets or an individual preset can be imported/exported. Presets can also be deleted. The current control state of the board is always saved and exported with the presets. The presets are copied to a file on the PC, and this file can then be downloaded to another MultiLogo, giving the same controls and presets as the original
Four GPI inputs
The four GPIs can be toggled between recalling presets and transition control, providing extremely flexible GPI control of each key level and making complicated effects from any mixer or automation system easy
When transition control is chosen, each GPI can be individually selected to control key layers 1, 2 and 3, start any of the video and audio players or do a mix between Program and Preview, allowing the three graphics to be faded up or down independently
Active: pull to ground, pulled up to +5V through 10 kohm
Works with pulse or latching GPI levels
One GPI output
The GPI output acts as a tally to indicate whether key layer 1 is faded up
Other GPI output connection is used to control the bypass relay
Electrically: Open collector transistors 30V, 270 ohm current limit resistors. Pulled up to +5V through 6800 ohm
ADDITIONAL GPIS WITH THE ML-GPI8 ADD-ON
The ML-GPI8 add-on board provides additional eight GPI inputs for recalling the first eight presets and eight GPI outputs which act as a tally and show which of the eight presets was recalled most recently via the GPI input
Makes MultiLogo V132 a ‘double decker’ board which uses two frame slots. The 16 GPI connections are accessed through the 26-way high density D-Type on the RM33 frame rear module which is used in combination with the standard RM52
LED INDICATION OF:
Power supplies okay
Board edge with ten character alphanumeric display
100Mbit Ethernet connectivity from the graphics PC straight into the video store on the board, via the RJ45 connector on the RM52 rear module, for easy transfer of images and audio files
MultiLogo Control Software is included on a CD with MultiLogo and allows advanced control of the logo keyer
MultiLogo Control Software stores a list of IP addresses at which any MultiLogos can be found, with the user able to easily change the control from one logo keyer to another by selecting from the list
Basic control from integrated control panel on AE frames and remote panel
Statesman Lite allows basic control from any PC on a network
VisionWeb Control is available via the web server on the frame and allows basic operation using a standard web browser on a PC or tablet
SNMP monitoring and control available as a frame option
Industry standard protocols help MultiLogo to work with automation systems. Second serial port (link select instead of GPI inputs) allows connection to automation systems and video mixers
Crystal Vision's ASCII protocol can be easily implemented for simple button box type control
RM52 frame rear module includes a dedicated RJ45 connector for RS422 control
What outputs do I get?
RM52 rear module label and connections
More about the RM52
Connectors: 4 BNCs and 2 RJ45 connectors (with relay bypass)
Frame slots used: 1
Boards in 2U: 12
Boards in 1U: 6
Boards in desk top box: 2
Why use it: It's the standard rear module for applications not using an ML-GPI8 add-on board
RM52 + RM33 rear module label and connections
More about the RM52 + RM33
Connectors: 8 BNCs, 26-way high density D-Type and 2 RJ45 connectors (with relay bypass)
Frame slots used: 2
Boards in 2U: 6
Boards in 1U: 3
Boards in desk top box: 1
Why use it: It's the rear module to use when an ML-GPI8 add-on board is fitted
Also used for: The following when fitted with a ML-GPI8 add-on board: MultiLogo V132 8G
For more visual technical information, download the MultiLogo V132 block diagram.
What do I order?
First you need the 100mm x 266mm module...
- MultiLogo V132
- HD/SD three-layer logo keyer with 4 GB internal store and one video input for main programme
If you want additional GPI inputs and outputs...
- Add-on board which provides additional eight GPI inputs and eight GPI outputs, designed for recalling presets (NB. Makes MultiLogo V132 a 'double decker' board which requires two frame slots)
Next choose your frame size and power supplies - from 2U to desk top box...
- Indigo 2AE
- 2U frame with power supply redundancy and active front panel featuring smart CPU and integrated control panel for up to 12 Crystal Vision modules. Allows Ethernet connection to a PC
- Indigo 2SE
- CoolFlow 2U frame with power supply redundancy and active front panel featuring smart CPU for up to 12 Crystal Vision modules. Allows Ethernet connection to a PC
- Indigo 1AE
- 1U frame with active front panel featuring smart CPU and integrated control panel for up to six Crystal Vision modules. Allows Ethernet connection to a PC
- Indigo 1SE
- 1U frame with active front panel featuring smart CPU for up to six Crystal Vision modules. Allows Ethernet connection to a PC
- Indigo 1AE-DP
- 1U frame with power supply redundancy and active front panel featuring smart CPU and integrated control panel for up to six Crystal Vision modules. Includes two fixed PS-80i power supplies. Allows Ethernet connection to a PC
- Indigo 1SE-DP
- 1U frame with power supply redundancy and active front panel featuring smart CPU for up to six Crystal Vision modules. Includes two fixed PS-80i power supplies. Allows Ethernet connection to a PC
- Indigo DT
- Desk top box with passive front panel for up to two Crystal Vision modules. Includes fixed power supply
- Indigo DTSE
- Desk top box with active front panel featuring smart CPU for up to two Crystal Vision modules. Includes fixed power supply. Allows Ethernet connection to a PC
- 160 Watts power supply for 1U (non-DP) and 2U frames. 1U frames require one PSU-160i (no redundancy). 2U frames require either one PSU-160i (no redundancy) or two PSU-160i if power supply redundancy is required
You need a rear module to access your inputs and outputs...
- Single slot frame rear module. Allows maximum number of MultiLogo V132 in frame (12 in 2U, six in 1U, two in desk top box). Provides relay bypass protection of the input. Gives access to one HD or SD input, one HD or SD Program output and one HD or SD Preview output
- RM52 + RM33
- Two single slot frame rear modules used together for when ML-GPI8 add-on board is fitted. Allows six MultiLogo V132 in 2U, three in 1U and one in desk top box. Provides relay bypass protection of the input. Gives access to one HD or SD input, one HD or SD Program output, one HD or SD Preview output and an additional eight GPI inputs and eight GPI outputs
Finally - control. The most popular method is to use the MultiLogo Control Software (supplied free on a CD when you buy MultiLogo) - often in conjunction with GPIs. Alternatively for basic control use board edge switches, the integrated control panel if you've selected one of the 'AE' frames, a web browser running the free VisionWeb Control (included within the frame software), or alternatively order one of the items below...
- 3U Ethernet remote control panel with touch screen
- Statesman Lite
- Free-of-charge PC Control System - download the latest version
- SNMP monitoring and control available as a frame option
Who's using it?
Users of the MultiLogo logo keyers include...
- What does it cost? Request a quote for MultiLogo V132...
- Want to hire instead? Request a hire quote...
- What controls has it got? Try out the VisionWeb demo for MultiLogo V132...
- Want more information? Get the MultiLogo user manual (and SNMP MIB) by signing up for the Registered Area now
- Version 1.72 of the MultiLogo Control Software was released on Find out here or contact our support team to request the latest version of the control software . Should you upgrade?
- The MultiLogo V132 module needs to be housed in a rack frame - look at the frame options
- Bought Crystal Vision products in the last 60 days? Register these products now to upgrade your standard three year warranty to five years
- MultiLogo V132 8G HD/SD logo keyer with 8 GB store
- MultiLogo V432 HD/SD logo keyer with 4 GB store and four external inputs
- MultiLogo V432 8G HD/SD logo keyer with 8 GB store and four external inputs
- LKEY 3 3G/HD/SD linear keyer
- LKEY-SQZ 3G/HD/SD squeeze back keyer
- Clip N Key V121 HD/SD clip and sting store with 4 GB store
- Clip N Key V121 8G HD/SD clip and sting store with 8 GB store
- Clip N Key V221 HD/SD clip and sting store with 4 GB store and two external inputs
- Clip N Key V221 8G HD/SD clip and sting store with 8 GB store and two external inputs
- Safire 3 3G/HD/SD real-time chroma keyer
- Safire 3 Xpress 3G/HD/SD real-time chroma keyer
Crystal Vision Ltd. is registered in England number 03139895. Registered office: Lion Technology Park, Station Road East, Whittlesford, Cambridge, CB22 4WL, England.
Tel: +44 (0)1223 497049 Fax: +44 (0)1223 497059 E-mail: firstname.lastname@example.org